Messy DIY and Crafting

Posts tagged ‘paper’

DIY Petal Aisle Border

I saw this on Pinterest and said “Want.”

inspiration petal border photo 17a9733638

And roughly $15 and about 20 hours of labor later, I have what I want:

Photo Feb 02, 10 33 54 AM DIY whit petal wedding aisle border DIY petal runner ivory border

Supplies:

Bags and Bags of Dollar Store Petals (300 petals per bag)–I suggest starting with at least 10 bags.

Roll of masking paper for painting (like you get at a home improvement store)

Glue–I started with regular white craft glue, but quickly changed to my trusted low-temp glue gun

Scissors and tape

Dye for Petals (optional, depending on your colors)–I just tea-stained mine to make them off white/ivory

Purple Pig Rating: Easy, not messy, but has “WOW” factor . 9.5 Oinks because it is awesome.

Steps:

There are lots of tutorials for DIY petal runners.  The big difference with mine is that I didn’t use tulle for the base.  I was at the home improvement store in the paint aisle and notices a 125′ of paper masking (like craft paper) in green that was a perfect match to our wedding colors.  It was $4, so I had to buy it. Some diy brides discuss gluing petals on tulle and the glue coming through the tulle (making it hard to work with). I had no problem like that using paper.

1. To make the edges, roll out the paper and fold in half. Mine is in 12.5′ sections.

Photo Jan 29, 8 16 17 PM

2. Cut your design on the folded side.

Photo Jan 29, 8 21 54 PM

3. The curly design is a series of arcs cut and taped together.  Overlay both sides on top of each other when taping so they are match.

Photo Jan 29, 8 28 18 PM Photo Jan 29, 8 28 44 PM Photo Jan 29, 9 00 10 PM

4. Optional Step: Dye/stain your petals.  These white petals from the dollar store are white-out white.  I’m an ivory girl.  So I boiled a big pot of water and dumped several cups of strong tea in it and brewed up some ivory petals.  I pulled them out at various times for subtle shade differences, rinsed and put in a salad spinner (yes a salad spinner) to dry off quickly.

5. Glue on petals.  Keep gluing, get more petals, keep going.  Bored? Keep gluing.

Put just a dot of glue on each petal, and stick the glued part under the “flap” of petal next to it to hide the glue spot.  Glue in different directions, and on top of one another. But I also found it easier to glue the edges first and then work inwards.  The look you want is dropped petals.

Photo Jan 29, 9 31 57 PM

I started with regular white kraft glue, but it took too long to dry, so I switched to low temp hot glue.  You hid your glue spots by only using a tiny drop and sticking that part under the petal next to it.

This picture just has the individual sections (6 in all, two side sections at 12.5′ each, and the two curly sections) just laying butted up to each other.  I will use tape the day of to attach them on site.

DIY whit petal wedding aisle border

(please ignore the bad photo stitch for this panorama shot.  I have limits with my iPhone).

Crepe Paper Streamer Flowers


This is an easy paper flower made from crepe paper streamers.  I adapted this flower from the Brides Cafe which used sheets of crepe paper.  However, streamers are more readily available, less expensive, and it cuts down on cutting.

Supplies:

Crepe paper streamer in your choice of colors (be sure to buy green if you want to add leaves & stems).  It’s about $1 for two rolls, each roll will make about 20 flowers. Skewer sticks (or you can use wire). Again about $1 for 50 sticks.  White school glue.

supplies

Time Commitment:

About 2 minutes per flower, with some drying time.

Skill:

Have to be able to hold a stick.

Purple Pig Rating:

8 oinks out of 10.  A decent messy factor since I manage to get glue all over my hands and eventually in my hair.  Very easy and cheap.  They look great, but making a whole bunch can get tedious.  I recommend mini-flower making sessions.

Detailed Step by Step:

1. Cut about a two foot length of streamer.

2. Fold the streamer in half, then in half again, then again…until it is about 1 inch or so wide.  Cut a rounded “petal” shape along the top.  Unfold & lie flat.

3.  Lightly squirt some glue along one short edge and along the bottom for a few inches.  Place your stick (I used a skewer) about 1/2 way up on the edge.  Remember, this is crepe paper, so a little glue goes a long way.  You also do not need complete, uniform glue coverage along the bottom.

4. Roll the stick a few turns to make the inside petal.  How many turns exactly? Just until you like the look–but at least 1 complete turn so it will be glued to the stick when you are finished.

5. Add more glue to extend your glue line along the bottom a by a few inches more (you’ll keep doing this as you go) and start rolling the stick slowly while you use your fingers to gently gather the streamer to the stick.  Just keep rolling, gathering, and sticking the crepe paper.  Here’s lots of pictures:

When you get to the end of the stream, add glue along the short end and finish rolling/gathering.

6.  Pinch the paper along the bottom where it meets the stick to make sure there is good contact with glue, paper, and stick.  I add just a bit more glue around the bottom as a just in case measure.  Then you just need to let it dry (hang upside down while drying if you used a lot of glue along the base).

6a. (Optional Step) Stem & Base with green crepe paper streamer–Cut about 2 inches of green, fold in half, fold in half again (and again) cut a point on BOTH short ends.  Unfold & lie flat.  Then fold in half long ways so the point ends do NOT line up.  Glue along the bottom straight edge and roll onto the base of the flower.  You can then continue to wrap the stick in green paper if you like (or paint it).

6b. (Optional Dual or triple, or ? colored flowers): Do the same procedure as above, but cut some alternate colors and glue at the base.  I did this at random intervals.

And that’s it.  I could have made 10-15 flowers in the time it took me to write this tutorial, it’s that easy.

$2 Backsplash

20120201-223525.jpg

20120210-173826.jpg20120210-173806.jpg20120201-223811.jpg

Our beautiful kitchen suffered from a boring tile backsplash. Actually, the tile backsplash had already received a “fix” from the previous owner. It was painted ivory (grout & all) to cover what I can only assume is hideous 70’s style tile underneath. Painting ugly tile is a definite improve, but it left our white kitchen rather boring. Also, since the backsplash was painted ivory next to a white countertop & cabinets, it always looked dirty and grungy.

20120201-150057.jpg

Inspired by the numerous decoupage coaster crafts from simple ceramic tiles, I thought why not decoupage the tile up on the backsplash? The color and design options are endless. And if covering non-painted ugly tile, it would save a lot of prep work (e.g., sanding, primer coat). Besides with decoupage textures are possible that are difficult at best for the average DIYer with paint alone.

And, it is cheap. The title is not a typo. A whole backsplash redo, even for large kitchens, is only a few dollars. I spent less than $2 to do my average size kitchen.

UPDATE: Well it has been exactly a year since I did this and it looks as good as the day I finished.  Absolutely nothing sticks to that gloss sealer I painted over it. The easiest backsplash to clean–easier that tile, because the painted grout is sealed too.  I still love it!

What you’ll need (supplies):

20120201-151722.jpg

You must have–A paint brush, scissors, white school glue mixed with water, cocktail napkins (or paper of your choice), sealer. Optional is paint for the grout (if you want to change the color from what you have), paper cutter (to make a lot of quick, precise cuts).

Time Commitment:

Cutting –about 15 minutes; decoupaging –1-3 hours depending on size of your backsplash; painting/sealing–an hour or so depending on the number of coats you do & if you paint your grout lines.

Skill:

Easy. this is my first decoupage project (other than when I was a kid). But I am handy with a paint brush!

Purple Pig Rating:

9 oinks out of 10–It has all the elements I love: slightly messy, easy, very cheap, and transformative (the wow factor).

DETAILED STEP BY STEP:

1. Clean your backsplash. It seems like cleaning is always the first step to doing anything fun (and messy). this is a step you can’t skip though. Scrub it down. Get rid of all the grease, grime, and un-indentifiables. Clear your countertop while you are at it so it will be easier to work.

2. Pick your paper, color, and design. This is a fun step. Cut a few colors out & tape them up to get a feel for how it will look. I used inexpensive solid color napkins (black & blue-grey). They work great and only cost about $.50 a package. One regular napkin makes four 4×4 tiles (what a bargain!) When picking out the paper, remember you’ll be doing a lot of cutting, so pick something you can trim with ease and cut in mass.

2.a. (Optional Step) Paint to change the color of or refreshen the grout. I suggest doing this before you start decoupage tiling so you won’t have to worry about staying in the lines while painting. The grout (& tile) in my kitchen were all painted ivory. I wanted a grey-blue grout color to match my new “tile.” As you can see in the picture, you really don’t have to be a great painter for this step. Keep some extra paint for touch ups and corrections after the decoupaging. Let the paint dry thoroughly before decoupage tiling.

20120201-195220.jpg

20120201-195326.jpg

3. Measure your existing tiles ( tile only, not the grout) and cut your paper to match. I had 4×4 tiles throughout. Using a paper cutter (or scissors), cut napkins to match. Quick tip: make a slim cut along both edges where the napkin is folded, and then cut to size. This will save you from unfolding lots of napkins. A standard cocktail napkin makes four 4×4 tiles. I left them as 2-ply, but you separate the plies to get eight tiles –the paper would be thinner of course (which may be the look you want–experiment!). I cut about three to four napkins at a time. All in all, it took about 10 minutes to cut all my napkin tiles.

20120201-201951.jpg

20120201-202028.jpg

Cut a sliver along each folded edge to save lots of time unfolding the napkins while cutting.

20120201-202038.jpg

4. Apply the napkin tiles –the fun & messy part! Mix one part of white school glue with two parts water & mix well. You can also use premixed, store bought decoupage medium, like Mod-podge, if you prefer. Brush it onto a tile, place cut napkin over the wet tile and smooth out lightly with you fingers. I wanted texture in my tiles, so I immediately went over the top of the napkin with the glue mix. To get a smoother surface, you should let it dry first, and then decoupage over the paper. There are lots of sites with decoupage instructions–all of which have more expertise than me. Try some different methods of application and go with the look you like. I wanted texture (AKA: wrinkles), so my method worked great and was really fast. This was basically my first decoupage project, so that gives insight to the ease of the project.

Cut napkin tiles as you go to accommodate half tiles, switches, etc. Be very careful around electric switches–it is a glue & WATER mix that drips. The key words there were water and electricity. Enough said?

The medium will drip so wipe up as you go. Stand back and look at your work every once in a while too. No use continuing if you don’t like how it is turning out. you can still take them down easily when wet (so no fear).

20120201-204738.jpg

20120201-204746.jpg

20120201-204752.jpg

20120201-204801.jpg

20120201-204825.jpg

5. Let it dry over night (12 hours) or a day. Brush on another coat of glue water medium. You can repeat this step as many times as you like . Each layer of decoupage deepens the over all look.

5a. (Optional) Go over your grout lines with matching paint to camouflage any mistakes (e.g., crooked/uneven tiles). You can also use matching paint to the tiles to cover small rips.

6. Seal the entire backsplash with craft varnish, or your favorite sealer. Water based sealers will keep the original colors while oil based sealers will yellow over time giving your work an aged appearance. This will protect your new backsplash from, well, splashes. Again, you can coat it several times with your favorite sealer/varnish. Also, remember using a matte, semi-gloss, or gloss sealer will give you different looks. I like shiny things, so gloss it is!

20120201-224404.jpg

Near final product -before gloss top coat sealer.

So let me know what you think. I love the look. I’ll post more close up pics once I have it sealed (the above pictures are before sealing). We’ll be replacing our countertop and few appliances within the next few years, but in the meantime the kitchen doesn’t have to be boring (or ugly). And yes, that is a built in can opener in the backsplash (now you know why I think it is 70’s style tile under that paint).

Here are some more photos–I love touching it.  The texture is awesome.

20120210-173751.jpg

20120210-173806.jpg

20120210-174043.jpg

Related articles

Decoupage tile coasters

%d bloggers like this: